Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎01-03-2017

2012 E-Tech 115, Motor runs in safe mode

Hi Guys.

 

I require help my one outboard motor starts and runs perfectly, however under torque it cuts off and runs on safe mode. I have replaced the plugs and Fuel filter but it still does the same. What would be the next step.

 

Regards

 

Leon

Admiral
Posts: 5,697
Registered: ‎07-14-2011

Re: 2012 E-Tech 115, Motor runs in safe mode

 

 

What rpm is the max it can acheive? If it is 1200 rpm then it could be in SAFE mode. If around 1800 rpm or thereabouts, then the motor may have been started with the throttle partway open instead of fully closed or the engine neutral switch is malfunctioning

 

We could use more descriptive details of how your are running and starting the motor and the model number. 

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.