Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Captain
Posts: 30
Registered: ‎04-27-2016

Steering Brace

Hi

 

Did anybody put the steering brace on their e-tec g2 when towing or is there such a thing

I look at the part & accessaries site and notice the steering brace but no part # 

I also seen motor mate but don't know if they make it for the e-tec g2

 

Rob

Admiral
Posts: 6,139
Registered: ‎07-14-2011

Re: Steering Brace

[ Edited ]

 

 

NEW:

 

Evinrude has their steering and trailering brace available now through your dealer.

 

G2 Steering Brace for Trailering
Evinrude part # 768606

 

 

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Captain
Posts: 30
Registered: ‎04-27-2016

Re: Steering Brace

Thanks

Mate
Posts: 4
Registered: ‎08-16-2016

Re: Steering Brace

I just purchased one thru my dealer-works great.

Captain
Posts: 30
Registered: ‎04-27-2016

Re: Steering Brace

Hi

What does it look like

 

Highlighted
Admiral
Posts: 6,139
Registered: ‎07-14-2011

Re: Steering Brace

 

 

the letter  H

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.