Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 11
Registered: ‎05-12-2015

Evinrude G2 Icon Touch Screen

Hello, I am from Spain and today my dealer have finished the installation of the outboard.
But the Icon screen doesnt work perfectly. When we start the outboard, appears with light the logo of Evinrude but then the ilumination disappears altought with the flash of a mobile it's possible to see the controls. In settings the option of light is 100%.
Anybody knows how to repair it?
Thanks
Admiral
Posts: 5,736
Registered: ‎07-14-2011

Re: Evinrude G2 Icon Touch Screen

 

 

 

If the blue wire on the back of the display is connected to a 12 volt source, it will dim the display for night vision use. The blue wire should  be connected to the dash light switch and only turned on when needed.

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Skipper
Posts: 11
Registered: ‎05-12-2015

Re: Evinrude G2 Icon Touch Screen

I have solved the problem.
The connectors of back parts were wrong.
Thanks
Highlighted
Admiral
Posts: 5,736
Registered: ‎07-14-2011

Re: Evinrude G2 Icon Touch Screen

 

 

Glad to hear that you got it fixed and that it was something quick and easy.

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.