Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 11
Registered: ‎06-24-2016

G1 vs G2 Production

Hi

Now that the G2 range spans from 150 to 300. Will You continue production of the G1 in the same range as before ?

 

rgds

Highlighted
Admiral
Posts: 5,697
Registered: ‎07-14-2011

Re: G1 vs G2 Production

The 300 G1 and a handful of other models are already out of production due to the success of the G2.

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.