Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 11
Registered: ‎06-24-2016

G1 vs G2 Production


Now that the G2 range spans from 150 to 300. Will You continue production of the G1 in the same range as before ?



Posts: 7,054
Registered: ‎07-14-2011

Re: G1 vs G2 Production

The 300 G1 and a handful of other models are already out of production due to the success of the G2.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.