Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 2
Registered: ‎06-03-2017

Evinrude etec 115hp cranks a bit before starting

Hi i have a 2006 evinrude etec 115hp with 698 hours have been great motor but today have to crank it for a bit before starting any help would be much appreciated
Admiral
Posts: 6,027
Registered: ‎07-14-2011

Re: Evinrude etec 115hp cranks a bit before starting

 

 

the Evinrude E-TEC 115 HP was first released as a 2007 model engine, though it may be manufactured in 2006.

 

What is the model number on your motor?  There were some service bulletins that applied to starting, but we have to know exactly what motor you have first.

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Mate
Posts: 2
Registered: ‎06-03-2017

Re: Evinrude etec 115hp cranks a bit before starting

I'll find out could of the motor lost its updates as the motor battery was dead flat a few weeks ago
Admiral
Posts: 6,027
Registered: ‎07-14-2011

Re: Evinrude etec 115hp cranks a bit before starting

A dead battery will not "lose" the EMM data

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.