Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 4
Registered: ‎05-16-2018
Accepted Solution

Picked up a new powerhead and need help identifying via aluminum disc!

This is a supposedly rebuilt powerhead, but don’t know much else. Was told it was a 115 of an unknown year. It has VRO and it is a bubble back. The aluminum disc read G3063834! Thanks in advance!
Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: Picked up a new powerhead and need help identifying via aluminum disc!

 

 

The nice thing about this website is that you do not have to repeatedly post duplicate questions.

We noticed your earlier post and are presently researching the numbers.  Those are from a company who went out of business about 18 years ago and it takes time to research the old archives. Please be patient.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 4
Registered: ‎05-16-2018

Re: Picked up a new powerhead and need help identifying via aluminum disc!

I apologize. I had posted on an older post and thought it may have went unnoticed.
Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: Picked up a new powerhead and need help identifying via aluminum disc!

 

 

 

1992 Johnson model J115TLAN

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 4
Registered: ‎05-16-2018

Re: Picked up a new powerhead and need help identifying via aluminum disc!

Thanks so much Bill! I appreciate it!