Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Skipper
Posts: 10
Registered: ‎12-04-2016
Accepted Solution

Trying to identify my 70hp evinrude.

I can only find the number G3643166 on the Welch plug. Any help would be appreciated
Admiral
Posts: 6,229
Registered: ‎07-14-2011

Re: Trying to identify my 70hp evinrude.

Can you post pictures of the motor cover decals and all sides of the engine powerhead?

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

How do I upload pics on here
Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

Issue not solved. Having trouble uploading pictures
Admiral
Posts: 6,229
Registered: ‎07-14-2011

Re: Trying to identify my 70hp evinrude.


Buckhunter33 wrote:
Issue not solved. Having trouble uploading pictures

http://community.evinrude.com/t5/help/faqpage/faq-category-id/images#images

 

http://community.evinrude.com/t5/help/faqpage/faq-category-id/images2#images2

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

Says I can't upload the pics because they are too large
Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

20161204_145845_001.jpg20161204_145831.jpg

Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

20161204_145822.jpg20161204_145810.jpg

Admiral
Posts: 6,229
Registered: ‎07-14-2011

Re: Trying to identify my 70hp evinrude.

 

 

Can you send images of the motor cover decals to narrow down the range? Are you sure that there is no serial number tag with the model number on it either on the transom brackets or on the swivel bracket ?

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Skipper
Posts: 10
Registered: ‎12-04-2016

Re: Trying to identify my 70hp evinrude.

20161204_145845_001.jpg20161204_145831.jpg20161204_145822.jpg20161204_145810.jpg