Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎07-23-2017

engine bogged down and shut off in heavey seas,

i Was in heavey seas with the bow up and motor trimmed when the motor sputtered and shut off, no alarms , i trimmed it up after a while trying to restart and finally it turned over , any reason for that ,so next time ill be aware when im in a fowl sea?

Highlighted
Admiral
Posts: 6,298
Registered: ‎07-14-2011

Re: engine bogged down and shut off in heavey seas,

 

 

We need the model and serial number of your outboard so we know what motor you have.

 

Can you provide more details and any engine service history that may help us?

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.