Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 30
Registered: ‎04-03-2015

2014 G2

I have a 2014 250HO G2. When is the service done. Five years or 500 hours? I only have 225 hours to date. Is the warranty 5 complete years or does it end on the anniversary of 5th Year.
Posts: 174
Registered: ‎09-12-2016

Re: 2014 G2

The service is done at whatever comes first, either 5 years or 500hrs. If you have 500 hrs on the motor at year 4, the service is required. if you hit 5 years and and less than 500 hrs, the service is required.


The warranty lasts for 5 full years from the date of purchase.

Posts: 7,054
Registered: ‎07-14-2011

Re: 2014 G2



For normal recreational use in fresh water, the Evinrude E-TEC G2 engine requires complete servicing at 5-years or 500-hours  -  WHICHEVER COMES FIRST.  The clock and calendar start the day of delivery date if a new motor. If it is a dealer demo motor, the clock starts at the time the dealer receives it.


If the motor is on a bass boat and used in tournaments, commercial usage or high-speed or heavy duty operations, then the service interval is shorter. See your dealer for more details.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.