Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 2
Registered: 2 weeks ago

Charging Module for 2015 25hp E-tec

Does my 25hp E-tec need to have electric start to install a Charging Module Kit? I'm installing a CMC Trim and Tilt and would like to be able to maintain a charge on the battery.

Admiral
Posts: 6,466
Registered: ‎07-14-2011

Re: Charging Module for 2015 25hp E-tec

 

 

What is the complete model number on your motor's serial number sticker?

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 2
Registered: 2 weeks ago

Re: Charging Module for 2015 25hp E-tec

The boat is in storage at the moment but the model number on the Bill of Sale is E25DRSLAB.

Admiral
Posts: 6,466
Registered: ‎07-14-2011

Re: Charging Module for 2015 25hp E-tec

 

 

You can order a battery charging accessory kit #5007996

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.