3 weeks ago
3 weeks ago
Refer to your Garmin instruction manual or contact Garmin support for specific questions on the product and its installation.
Normal installation of a NMEA2000 component is accomplished by inserting a Tee-fitting in the network backbone cable and fastening the item's cable to the middle connector of the Tee.
The following links may help explain NMEA2000 networking
"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.
The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.