Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 15
Registered: ‎09-14-2015

Engine display

Where can I learn more about the digital engine display that South Bay uses on their BRP preped pontoons? We are looking at a 90 pontoon series on a SB 520CR.

Admiral
Posts: 6,340
Registered: ‎07-14-2011

Re: Engine display

 

 

Here is some information on the Evinrude 7.0", 4.3", and 3.5" digital displays

 

http://www.evinrude.com/Content/Pdf/en-US/partsAndAccessories/gaugesanddisplays/brp_rig_icontouch.pd...

 

 

Article about the 7.0" display:

http://continuouswave.com/ubb/Forum6/HTML/003756.html

 

 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.