Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 3
Registered: ‎11-04-2017

Locating serial numbers

Hi All,

 

I have an evinrude 150 etec motor, but I suspect that a dealer has switch motors on me and that he has also switched the sticker that has the serial number and model number. Are there other locations or other ways I can find the serial number and model number of the motor?

 

According to my paperwork the serial number of the motor of my boat is 05474533 and the model number c150FLH. When i checked with the Evinrude office the serial number 05474533 is referring to an evinrude etec 150 HP. However i noticed that an evinrude etec 150 HO is currently installed on my boat. When I asked the dealer about this he sent me a picture of the sticker with with the above serial numbers and model number that is attached to the evinrude etec 150 HO motor. So i need to find a way to proof to the dealer that the motors and the stickers have been switched.

 

Thanks!

Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: Locating serial numbers

[ Edited ]

 

 

 

 

#05474533 is an EVINRUDE  C150FLHAA  - a 150 HO model 

 

Defacing or trying to remove a serial number tag results in the numbers vanishing and the word VOID appearing multiple times in their place.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 3
Registered: ‎11-04-2017

Re: Locating serial numbers

Thank you BluewaterBill!

When I contacted the Evinrude office they told me that serial number 05474533 is refering to an evinrude etec 150 HP. So now I am really confuse. Is there a website where i can check this myself.

Thanks!

Mate
Posts: 3
Registered: ‎11-04-2017

Re: Locating serial numbers

Base on the following serial number and model number can the year of the motor be determined:

 

#05474533 and C150FLHAA

 

Thanks!

Highlighted
Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: Locating serial numbers

  

There are no yearly designations in the outboard motor industry, everything is determined by the model number.

 

A tag on the motor does show the manufacturing date.

 

Your motor is a 150 HP Evinrude. There are 2 models of the 150, a regular version and a higher output version as signified by the letter H in the model number.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.