Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 3
Registered: ‎07-25-2017
Accepted Solution

water/fuel seperator

Would using a after market spin on type water/ fuel filter separator be useful or harmful on my E75DPLSCB ?
Skipper
Posts: 17
Registered: ‎10-22-2012

Re: water/fuel seperator

With today's fuel , it is the cheapest insurance you will buy! Change the filter often - much cheaper than injectors / pumps

Admiral
Posts: 6,300
Registered: ‎07-14-2011

Re: water/fuel seperator

 

 

the Evinrude rigging and installation guides recommend a boat mounted fuel-water separator filter to protect the engine.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 3
Registered: ‎07-25-2017

Re: water/fuel seperator

I thought so. I have had them on a few older outboards with no issues. I read a comment somewhere it was not a good idea on newer 2 stokes. I dont remember the reasoning to the statement. Thanks for the quick reply !