Evinrude 225 60 degree engine specs
hello I recently became aware that evinrude makes two different 225HP engines a 60 degree and a 90 degree the 90 being a jumbo sized engine.
I have a 2004 Johnson 175HP I believe it is a 60 degree it's weight is 373LBs.
I'm interested in upgrading to a 225HP to a newer engine (not the G2 but the white etec) but don't want to increase the weight to much.
maybe you could explain to me the differences in the 60/90 engines.
also I would like to reuse my BRP binnacle and control cables is this possible.
Your 2004 175 HP is a 60° engine but Evinrude does not make 60 ° in a 225 HP
The 225 is a 74° V6 block. Only the 200 hp is a 66° block and the 200 HO is a 74° block
"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.
The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.