Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎05-04-2018

Internal Zincs

I picked up my new boat today and he showed me the 2 zincs thatbill have to watch as I’ll be in salt most of the time. Are there any internal zincs? He told me. I but that seems impossible...

Motors 2 x 225HO - G2’s

Cheers,

WW
Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: Internal Zincs

There is an anode inside the gearcase exhaust opening that normally lasts almost forever and is only normally changed it if the propshaft bearing carrier is serviced and it shows signs of deterioration.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.