Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 10
Registered: ‎10-18-2016
Accepted Solution

Oil type for 2017 200 hp G2

Having a Bluewater 2550 built and we should take delivery in the next couple of months. We have requested two Evinrude G2 200 horsepower outboards and was wondering what type of 2-stroke oil I need to use? Want to stock up before boat arrives.
Admiral
Posts: 6,229
Registered: ‎07-14-2011

Re: Oil type for 2017 200 hp G2

 

 

 the best oil for your motor is Evinrude's XD-100 synthetic lubricant
 
765146   XD100™ Oil   Quarts 
764357   XD100™ Oil   Gallons  
777119   XD100™ Oil   2.5 Gallons  
763716   XD100™ Oil   5 Gallons 
764358   XD100™ Oil   16 Gallon Drum 
777120   XD100™ Oil   55 Gallon Drum 
***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.
Skipper
Posts: 10
Registered: ‎10-18-2016

Re: Oil type for 2017 200 hp G2

Thank you Bluewaterbill for the quick response.
Highlighted
Admiral
Posts: 6,229
Registered: ‎07-14-2011

Re: Oil type for 2017 200 hp G2

 

 

You are welcome, now go out and enjoy your new motor  ! ! ! 

***************


"There is never just one thing wrong with a boat";
                                                 -- Travis McGee, main character in a book series by John D. McDonald


***************
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. If you elect to do it yourself, be sure to use caution, common sense, and to observe all safety procedures in the vicinity of gasoline, moving engine parts, high temperature components, heavy items, and electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation or a technique, enlist the services of a factory trained technician.