The first thing to do is find out if there is any fuel pressure from the high pressure pump and if there is ignition and if fuel travels easily from the tank to the motor. A no start condition can be any number of things and you dealer is the best place to have it checked over if you do not have a factory service manual and familiar with how an E-TEC operates.
"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.
The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.
Same issue I replaced the fuel line and other crap no help can only be fixed at a dealer.. currently waiting a fuel pump and vapor seperator to be installed before a further evelation can occur !
Same issue ran great then last year it out after I ran it twice. Changed out fuel line and other parts. No luck. Only a dealer can fix it. Currently waiting a fuel pump vapaor regulator to be installed before a further investigation can occur. There was a recall mine was not part of it.