07-24-2016 05:54 - edited 07-24-2016 08:34
the guy whom sold this to me had a sence of humor and painted over the 9 9. there is a large 9 with a small 9 to the rright with a small bar under the second 9 if that helps.
Any help would be appreciated
Solved! Go to Solution.
07-24-2016 10:37 - edited 07-24-2016 10:42
It looks like you have a 1977 Evinrude. It appears to be a very clean low time engine for its age.
If you want to bump it up to 15HP, go to www.shop2.evinrude.com and select the correct year and HP, then compare the part numbers of the powerhead, carb, and exhaust system that are different between it and the 15 HP of the same year. That will tell what you have to replace to achieve 15 HP out of your motor.
"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald
The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.
The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.