Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 2
Registered: ‎03-21-2016

Low oil pulse

My DE300PZABA 300-HP has a low oil pule coming up on my gauges and is not allowing the motor to ramp up it has low RPM lock on ANY HELP!!

Posts: 9,593
Registered: ‎07-14-2011

Re: Low oil pulse

Often it is just an air bubble that passes throught. Run the winterizing procedure, sometimes twice is needed. Run the boat between procedures to keep from builiding up oil in the crankcase and what may drip from the exhuast by the prop.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.