Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 3
Registered: ‎10-10-2018

Re: 2007 150 e-tec fule injectors

Do you have a link to buy them please?
Posts: 8,250
Registered: ‎07-14-2011

Re: 2007 150 e-tec fule injectors

They have to be purchased from an authorized dealer and the dealer needs to install them as there are numerical coefficients that have to be programmed into the engine's onboard computer, the EMM, using Evinrude's diagnostic software and a laptop.






"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.