Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 4
Registered: ‎08-04-2015

Bill please help me find serial number

 
Highlighted
Admiral
Posts: 8,568
Registered: ‎07-14-2011

Re: Bill please help me find serial number

 

 

How about pictures of the decals on the motor cover and images of the powerhead with the cover removed? We need all sides to help determine the age of the motor.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Skipper
Posts: 10
Registered: ‎02-15-2017

Please help ID motor

Highlighted
Skipper
Posts: 10
Registered: ‎02-15-2017

Re: Please help ID motor

powerhead #:  590362

Highlighted
Skipper
Posts: 10
Registered: ‎02-15-2017

Re: Please help ID motor

25.png

Highlighted
Admiral
Posts: 8,568
Registered: ‎07-14-2011

Re: Please help ID motor

[ Edited ]

 

 

It appears that the motor is a 1.5 HP manufactured between 1948 and 1951.

 

For more information, parts, decals, etc.  visit and join   www.aomci.org

 

For manuals go to www.outboardbooks.com 

 

Please delete  the numerous unecessary posts that you placed here today on E-NATION, thanks.  

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.