Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 4
Registered: ‎08-16-2016

G2 trailering issues

I have a 2016 G2 200 HO. When I go to trailer it,even with trailering arm ,I need to tie it down from falling right or left when I turn. No way can this be normal??

Highlighted
Admiral
Posts: 8,832
Registered: ‎07-14-2011

Re: G2 trailering issues

[ Edited ]

 

 

It is normal for the engine with its hydraulic steering to eventually work its way over to one side while trailering. The easy way is to turn the motor  all the way to one side after tilting it up. Another solution is to use a trailering brace designed for the G2 E-TEC.

 

G2 Steering Brace for Trailering  -  Evinrude part # 768606

 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 4
Registered: ‎08-16-2016

Re: G2 trailering issues

Purchased one-works great -thanks