Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 3
Registered: ‎05-01-2018

Paint flaking off steering arm

So I discovered this problem back in May. The paint is flaking off of my steering arm. The motor 300 HP G1 was hung brand new in 2015 and still has warranty time left. I love the motor but this paint problem is becoming an issue. First of all, I have contacted the place of purchase several times. First I was told all engines do this. Funny, I had twin 2001 Yamaha's OX 66 and never had that issue after 10 years of ownership. I then ran into him and he said to send him more pictures to which I did back in early June. Still  no reply. Im sure this isn't Evinrudes fault due to Im pretty sure they aren't getting the information. I plan on keeping this engine for a very long time, but don't want to deal with corrosion issues either. I am done with dealing with Source 1 Marine in Hudson and am just looking for help. Thanks, BrianPaint.jpg

Posts: 9,386
Registered: ‎07-14-2011

Re: Paint flaking off steering arm



please send an email with the engine serial number, dealer name, and a brief history of the motor to http://www.brp.com/en/forms/contact-us.html




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.