Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 1
Registered: ‎10-05-2019

Prop selection for high altitude

Hello everyone,,

In the process of ordering the newly re-designed Ranger Z521C which I'll power with an E-TEC 250HO. I live and guide most often at 6000 feet in elevation, and almost always have three people in the boat. Anyone got ideas for prop size/model? I prefer a torquey feel and driveability over pure top speed.


Thanks in advance! CL

Posts: 9,204
Registered: ‎07-14-2011

Re: Prop selection for high altitude

A 26" Raker II is a popular prop for that rig when close to sea level.  Most likely a 24" version should do what you want. 


Propping is trial and error most of the time. If there is an Evinrude dealer somewhere in the area, they may be familiar for knowing which exact prop to use at that elevation.




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.