Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 3
Registered: ‎10-19-2020

hard miss at higher speeds

60 hp e-tech developed a hard miss last time out on water.  Miss was regular (every 12-13 secs) & felt like a bump/glancing blow from log/stick up.  Ran perfect running up river, had regular miss on return trip back down river.  Gas tank vent was vented, but only slightly (1/2 turn from closed).  Could poor venting be issue or perhaps something else?

Highlighted
Mate
Posts: 2
Registered: ‎10-19-2020

Re: hard miss at higher speeds

Nice one
Highlighted
Admiral
Posts: 9,506
Registered: ‎07-14-2011

Re: hard miss at higher speeds

[ Edited ]

If it feels like hitting something as you described it may be jumping out of gear possibly due to cable adjustment, linkage slop or worn clutch dog and gear, See an Evinrude tech for proper diagnosis and inspection.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 3
Registered: ‎10-19-2020

Re: hard miss at higher speeds

Thxs for the feedback.  Will post what it turns out to be.