Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Skipper
Posts: 9
Registered: ‎09-02-2014

Evinrude E-TEC G2

I'm thinking about buying a new E-TEC G2 for my Ranger Z522. Should I buy a H.O. or the regular model?

Highlighted
Admiral
Posts: 8,574
Registered: ‎07-14-2011

Re: Evinrude E-TEC G2

 

 

If you are looking for the best performance, speed, and acceleration, get the Evinrude E-TEC 225 HO as it is tuned and designed for best performance.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 2
Registered: ‎09-21-2015

Re: Evinrude E-TEC G2

I just purchased the 200 HO G2 and I absolutely love it! Pushes my stratos at awesome loaded speeds and turns heads on blast off!
Highlighted
Admiral
Posts: 8,574
Registered: ‎07-14-2011

Re: Evinrude E-TEC G2

Congrats !

 

Tell us about your rig - prop, rpms, top speed, etc.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.