Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 0
Registered: ‎07-27-2018

NMEA2000 & Humminbird Solix

G2 engine outputs to Humminbird Solix

 

On Solix there is the option to view OIL Level. However mine will not indicate anything.

 

Have pro gauges and oil level shows on evinrude gauge.

 

Other motor outputs can be selected on solix.

Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: NMEA2000 & Humminbird Solix

 

 

Many displays only provide for the common NMEA2000 protocols such as rpm, voltage, water temp, etc. Outboard companies have in addition proprietary warning or informational data that can only be shown on their products.

 

That is why you need at least one Evinrude gauge to keep your warranty in force allowing the boat operator to become aware of any warnings or changes in essential engine parameters.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.