Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 10
Registered: ‎01-10-2017

Pro Icon 3.5" gauges

Does anyone know if the 3.5" Pro Icon RPM and Speedometer gauges display 1 or 2 lines of data? The manual is unclear, and suggests that the RPM gauge can show a 2nd line of data, although the choice is somewhat limited.Thanks for any information on the matter.

Posts: 4
Registered: ‎01-29-2017

Re: Pro Icon 3.5" gauges

First post here.


From my recent research the 5" Pro has 2 lines and the 3.5" Pro has 1 line.

Posts: 7,099
Registered: ‎07-14-2011

Re: Pro Icon 3.5" gauges



One line of data is correct for the regular ICON Pro gauge. Here is a link to an article about them that you may find interesting.






"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.