Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 0
Registered: ‎09-13-2018

100 hp 2 stroke evinrude

So I have a older evinrude and well my issue is that when I was on the water I would put the engine into throttle and she would accelerate but never go to plane. She never got in plane with I I had all the throttle up..... So I stopped and eventually it would go on plane but after it got on plane there would be no issue at all .....any suggestion or answers??? Plz thx
Mate
Posts: 0
Registered: ‎09-13-2018

Re: 100 hp 2 stroke evinrude

 
Admiral
Posts: 7,209
Registered: ‎07-14-2011

Re: 100 hp 2 stroke evinrude

 

 

First we need a model number to know which motor you have. The 100 HP versions have been around since 1966 in various configurations over the years.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.