Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 15
Registered: ‎10-22-2018

15 HO mounting bolts

Hi, just wondering if someone is able to tell me the distance from side to side and top to bottom for the mounting holes on a 15 HO. My motor is currently in storage at the marina until spring so I'm unbale to measure it myself. The reason I ask is that it looks like a larger than usual mounting bracket on the 15 HO and the boat I'm looking at buying has a plate welded to the transom that's 11 3/4" wide x 9 3/4" long. I'm hoping the mounting bracket for the motor will fit within that space and not overhang it so that it can bolt through the plate.

 

Thanks in advance for any info.

Admiral
Posts: 7,257
Registered: ‎07-14-2011

Re: 15 HO mounting bolts

 

 

 

Page 42

 

http://www.operatorsguides.brp.com/OperatorsGuidesAttachments/OwnersManuals_EJ/attach/Accessories/50...

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Admiral
Posts: 7,257
Registered: ‎07-14-2011

Re: 15 HO mounting bolts

 

 

CORRECTION to previous post:

 

Pages 44 and 45

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Skipper
Posts: 15
Registered: ‎10-22-2018

Re: 15 HO mounting bolts

Thanks Bill!