Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Captain
Posts: 24
Registered: ‎02-25-2014

Re: 2000 150 fitcht

Well installed the used emm fri and she started right up no codes.no alarms ran on the lake 3 days,

left old injector codes for now,so far so good.Going to leave it in break in mode for awhile,or maybe from now on?

Highlighted
Admiral
Posts: 9,386
Registered: ‎07-14-2011

Re: 2000 150 fitcht

We will keep our fingers crossed for you.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Captain
Posts: 24
Registered: ‎02-25-2014

Re: 2000 150 fitcht

Thanks if nothing else I'll be (well) a good test dummy.