Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎03-03-2017

2000 evenrude ficht e175fplssv

When I turn the key on, the lights in the dash cycles and beeps but they start flashing and it won't turn over...All I can hear in the motor is the fuel pump clicking..Can anybody tell me what to check....It only does this when it's real cold outside or when it's really hot and the sun is heating my motor cover up..
Highlighted
Admiral
Posts: 8,427
Registered: ‎07-14-2011

Re: 2000 evenrude ficht e175fplssv

 

 

We need a bit more information if you would.

 

After you turn the key to ON and the SystemCheck lights sequence on and off, which lights remain flashing? Is it all 4 lights or only one light, and which one?

 

Was there any work done to the boat or motor prior to this happening or did the engine exhibit any strange  symptoms before it did not want to start?

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.