Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎07-21-2019

2004 evinrude wont trim all the way down

It trims up and down fine, but when it hits the 2 outer pistons it wont budge so it wont trim all the way down.  ?

Mate
Posts: 2
Registered: 3 weeks ago

Re: 2004 evinrude wont trim all the way

Did you find the problem? We are having the same issue and cant figure it out.

Mate
Posts: 2
Registered: 3 weeks ago

Re: 2004 evinrude wont trim all the way down

Did you find the problem? We are having the exact same problem and cant figure it out.

Highlighted
Captain
Posts: 590
Registered: ‎08-20-2017

Re: 2004 evinrude wont trim all the way down

This could be caused by internal valves in the pump assembly or a binding or bent tilt tube.
Try putting the engine on the tilt lock and then pressing in on the two trim Rams while holding the trim button down.
Also try opening the manual release valve.