Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎04-26-2012

2007 E-tec 225 I-command gauges

The I-command gauges I purchased with my 20007 E-tec have failed.These gauges are no longer available from Evinrude. The new series of gauges only work with 2008 and newer engines. Does anyone know of any available digital gauge options?

Highlighted
Admiral
Posts: 7,054
Registered: ‎07-14-2011

Re: 2007 E-tec 225 I-command gauges

The new style gauges (ICON) and the digital I-Command series work with all years of the E-TEC 225.  It is only the 40 through 90hp motors that have to be 2008 and newer to use them.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.