Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎03-19-2017

2010 25hp water pump

I have a like new 2010 25 hp that I want to change the water pump on but I am having a hard time finding the correct part number. Also what other maintance should I preform? and one last thing, what prop should I be running I would like to have a spare. Sorry for all the questions but thanks for the help all.

 

Joe

Admiral
Posts: 8,424
Registered: ‎07-14-2011

Re: 2010 25hp water pump

[ Edited ]

 

 

#5508972 is the part number for the improved water pump kit for your motor. It also includes relief springs that have to be installed because of the increased pressure that the new-style pump generates. If you do it yourself, follow the directions carefully and perform  all the steps. It is best to obtain a factory service manual if you elect to do the maintenance .

 

The service manual and your operator's guide outline the maintenance needed for the 3yr.--300 hour intervals.

 

The propeller has to be determined by the rpm the engine can attain at full throttle with a normal load of people, gas, and gear. A tachometer is needed.

 

The link is for a factory video on propping.

http://www.youtube.com/watch?v=xbDsTBhL4Cs

 

 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.