Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 3
Registered: ‎01-19-2019
Accepted Solution

2014 evinrude 200 hp etec

What does ESC 201 warning indicator stand for??
Mate
Posts: 3
Registered: ‎01-19-2019

Re: 2014 evinrude 200 hp etec

Ps a BRP 200 HO.
Admiral
Posts: 7,598
Registered: ‎07-14-2011

Re: 2014 evinrude 200 hp etec


@Fishin4fun wrote:
What does ESC 201 warning indicator stand for??

 

 

I assume that you have an Evinrude G2 E-TEC model. What is the complete model number of your motor?


code 201 has to do with the shifting, something is not in synch with the shift sensor and the shifter control positioning. See your dealer to have it corrected.

Shift Position Sensor does not correlate


 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 3
Registered: ‎01-19-2019

Re: 2014 evinrude 200 hp etec

E200LH0ABA
Admiral
Posts: 7,598
Registered: ‎07-14-2011

Re: 2014 evinrude 200 hp etec

Yes, that is a G2 model - a 200 HO with an ABA suffix. The outboard motor industry does not use yearly designations anymore. Everything is identified by a model number now.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.