Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Skipper
Posts: 6
Registered: 3 weeks ago

2015 200 Etec G2 Trim/Tilt Issue

Have an issue with our 2015 200 ETEC  trim/tilt and before we take it in for warranty I would like to research this issue. I had just replaced the engine mounted trim/tilt switch as it was faulty (intermittent power) and it works great other than when tilting up, it doesn't go all the way up. It will start tilting, engages the next speed and then stops at about 3/4 the ways up.

Any ideas or anyone have this issue yet?

Highlighted
Captain
Posts: 20
Registered: ‎04-22-2020

Re: 2015 200 Etec G2 Trim/Tilt Issue

if works, and stop in some position, and you dont hear motor running, than you have power cut off.
look up for the limit switch.

Highlighted
Skipper
Posts: 6
Registered: 3 weeks ago

Re: 2015 200 Etec G2 Trim/Tilt Issue

Thanks, Josey,

 

I did fix it by resetting the tilt/trim by tilting it all the way down and pressing and holding the two buttons for 3 seconds, tried to go up to the top and boom, it did! Thank you for the help though, always so appreciated!