Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 1
Registered: ‎03-17-2020

2015 250 ho g2 e-tec steering

problem steering to post side when running towards top speed, evinrude mechanic said it was torque....does not sound like right answer.

Posts: 52
Registered: ‎10-14-2016

Re: 2015 250 ho g2 e-tec steering

If you mean that the boat has a tendency to pull to the port side when going full trottle that is not normal I have the same engine and I can take my hands off the helm and the boat keeps on going straight.

Posts: 9,063
Registered: ‎07-14-2011

Re: 2015 250 ho g2 e-tec steering

It is likely the reaction to propeller torque and sometimes raising the motor or changing to a different style propeller can minimize it, as can trimming the engine out more if possible




"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.