Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 1
Registered: ‎09-13-2020

2020 200hp G2 problem!

My new outboard (and at least 3 others I know of) are experiencing the same shut down issues for no reason. Not getting any obvious fault codes or warnings. We have all reached out to Evinrude to try and get help to no avail. My issue has gone on for 5 months and Evinrude has virtually ignored my warranty case that was opened up in early June. Can anyone help??
Highlighted
Admiral
Posts: 9,466
Registered: ‎07-14-2011

Re: 2020 200hp G2 problem!

Check your key switch harness, there was a service bulletin about hesitating on starting and often sudden shutdowns. The key switch harness should be gray colored. If black, see your dealer.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.