Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Skipper
Posts: 13
Registered: ‎01-23-2012

Blue vs. White

Hello,

 

  I'm looking at getting a 90hp.  Used as I cannot possibly afford new.  I notice that there are Blue and White motors.  I have read somewhere that the White ones are designated as Saltwater versions.  Does this mean the Blue ones have an inferior corrosion resistance treatment?   The one I'm hoping to get is Blue but I fish exclusively in Saltwater.  Would using the Blue motor in Saltwater void the warranty (there's 3 yrs. remaining)?

 

So what exactly is the difference between these motors?

 

Thanks,

Terry B.

Admiral
Posts: 8,431
Registered: ‎07-14-2011

Re: Blue vs. White

Often the white motors are the 25" shaft length versions and are more likely used on larger boats, such as offshore rigs.

 

Years back the only real difference between the blue and the white motors was the steering arm. Everything else was the same and they all use stainless steel hardware. There is no problem using a blue motor in saltwater and that does NOT affect a warranty. Be advised that Evinrude suggests greasing the fittings and the prop shaft splines more often than the 3yr/300 hr interval when used in saltwater.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 3
Registered: ‎02-18-2012

Re: Blue vs. White

White is faster   Smiley Happy