Dps in gauge

Cerencio · ‎07-28-2018

I have 300hp g2. May problem is the dps display of gauge are not fuction. Its didnt switch to other option so. I need to fuction again to gauge the min med and max of dps. Can you help me to solve its sir....

ElderSparky · ‎10-21-2015

Begin by verifying that the gauge has the most recent firmware installed in it.

ElderSparky

· Was your question answered? Help others find the answer by clicking "Accept as Solution".
· See a great post? Give a Kudo

to show your appreciation!

BluewaterBill · ‎07-14-2011

Which gauge or display do you have?

What is your engine model number?

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

Rickmcd53 · ‎08-20-2017

Cerencio, Can you not get to the DPS setting screen? Or will that screen come up but you are not able to change the DPS assist levels?

Cerencio · ‎07-28-2018

Rickmcd53 yes sir the gauge cant touch to chance to other choices of dps in monitor

Cerencio · ‎07-28-2018

Bluewaterbill dis is my engine model E300XUAGB

BluewaterBill · ‎07-14-2011

What display do you have and where are you located?

"There is never just one thing wrong with a boat";
-- Travis McGee, main character in a book series by John D. McDonald

***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

Dps in gauge

Re: Dps in gauge

Re: Dps in gauge

Re: Dps in gauge

Re: Dps in gauge

Re: Dps in gauge

Re: Dps in gauge