Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 3
Registered: ‎12-12-2018

E150D Starter staying engaged

I have a E150D that the starter is staying engaged and powered after the start function is released. The starter is new and a known good one off the other motor does the same thing. If I pull and replace the start circuit connector on the solenoid, the starter ceases to spin and all is good. If I turn the key off, the motor and the starter cease. Before I start throwing parts at it, has anyone dealt with this and could save me some time? 

Mate
Posts: 3
Registered: ‎12-12-2018

Re: E150D Starter staying engaged

I swapped the wire harnesses behind the key switches. The issue stayed with the switch. My plan is to change the ignition switch at the helm. Am I troubleshooting this properly?

Captain
Posts: 533
Registered: ‎08-20-2017

Re: E150D Starter staying engaged

If you swapped the harnesses on twin engines and then the problem was on the other engine (stayed with the key). Then the problem should be the ignition switch.
Mate
Posts: 3
Registered: ‎12-12-2018

Re: E150D Starter staying engaged

I swapped the key switch and eliminated the problem. Yes, I have twin engines.

Highlighted
Admiral
Posts: 8,276
Registered: ‎07-14-2011

Re: E150D Starter staying engaged

 

Glad to hear that you found and fixed the problem

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.