Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 3
Registered: ‎03-31-2018

Envinrude 2015 G2 Error code 219 power steering

Has anyone gotten or know what this code means?
Admiral
Posts: 8,400
Registered: ‎07-14-2011

Re: Envinrude 2015 G2 Error code 219 power steering

 

 

Can you double check the code number, post the engine model and serial number, and describe the symptoms that appear? 

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Mate
Posts: 3
Registered: ‎03-31-2018

Re: Envinrude 2015 G2 Error code 219 power steering

code number was 219
Engine Model is E250LHO
serial number 5421979
Its a 2015

Symptoms are nothing but that code. there was fluid leaking in the morning but it stopped. Code said power steering failure, but it ran and steered fine.

Any help would be appreciated
Captain
Posts: 215
Registered: ‎09-12-2016

Re: Envinrude 2015 G2 Error code 219 power steering


@ecusano0403 wrote:
code number was 219
Engine Model is E250LHO
serial number 5421979
Its a 2015

Symptoms are nothing but that code. there was fluid leaking in the morning but it stopped. Code said power steering failure, but it ran and steered fine.

Any help would be appreciated

Weird.The service manual lists codes 217,218 and 220. There is no 219. The codes listed have to do with power steering. Maybe it was added after the document was published.

Captain
Posts: 133
Registered: ‎08-11-2011

Re: Envinrude 2015 G2 Error code 219 power steering

Codes between 211-221 are for DPS models only. E250LHO has hydraulic steering.
Captain
Posts: 133
Registered: ‎08-11-2011

Re: Envinrude 2015 G2 Error code 219 power steering

Is the software up to date for engine, control head and gauge(s)?

 

Mate
Posts: 3
Registered: ‎03-31-2018

Re: Envinrude 2015 G2 Error code 219 power steering

Yes up to date
Highlighted
Admiral
Posts: 8,400
Registered: ‎07-14-2011

Re: Envinrude 2015 G2 Error code 219 power steering

 

 

The fact that fluid was leaking should make it imperative that you take it to the dealer for troubleshooting before using the boat again.

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.