Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 2
Registered: ‎08-24-2020

Error code 31

Anyone know what causes the error code 31 on a 2019 250 HO G2?

Highlighted
Admiral
Posts: 9,387
Registered: ‎07-14-2011

Re: Error code 31

 

G2  Code 31

 

Water Temp/ Hot (Flashing)

Engine Temperature > 239° F (115° C). Engine SHUTDOWN.

Check cooling system. Check temperature sensor resistance—9000 to 11000 Ω @ 77°F (25°C).

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.