Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Captain
Posts: 215
Registered: ‎09-12-2016

Re: Etec G2 300hp operating parameters and manual

[ Edited ]

Yes, they do. I have a new 225 HO G2.

 

You can get it on e-bay also:

http://www.ebay.com/itm/Evinrude-E-Tech-Service-Manual-/142106573435

 

It's for the latest version (AG)  and before 3.4 L 200, 225, 250, 300 G2

 

5010014 is the part number. It's also on the evinrude site as I said.

Captain
Posts: 46
Registered: ‎03-29-2017

Re: Etec G2 300hp operating parameters and manual

Fantastic thanks for heads up
Captain
Posts: 46
Registered: ‎03-29-2017

Re: Etec G2 300hp operating parameters and manual

 
Skipper
Posts: 6
Registered: ‎04-24-2018

Re: Etec G2 300hp operating parameters and manual

Can you tell me where to find bullitin about water to #6 cyl.

 

Dealers all claim they know nothing

 

I have a 2016 300 G2

Captain
Posts: 46
Registered: ‎03-29-2017

Re: Etec G2 300hp operating parameters and manual

Hello k2sanjuan,
This is problem I had in April 27,2017.
Evinrude has a repair kit you can order thru your Evinrude mechanic/dealer. Thirthy minute to repair. Contact your authorized dealer/mechanic and they will take care of you. Mine is located in Gulf Shores Alabama, Jeremy at Rods Marine. Great guy. Good luck.

2017 Etec G2 300 warning Bulletin on the number 6 cylinder seizing up approaching maximum speed
mcleodbonairega mcleodbonairega Captain
Apr 27,2017 ETEC G2 300 Warning Bulletin on the number 6 cylinder seizing up approaching maximum speed ????
Model number E300XUAGF,
Serial # 5490726.

Only a limited number of Evinrude E-TEC G2 74° V6 250 H.O. & 300 HP outboards, between serial numbers 5478166 and 5490777, are affected.

Your serial # 5490726 is included so call your dealer to get it serviced as soon as possible. It takes less than an hour for installation and the factory is sending kits for every affected engine the dealership sold.
Highlighted
Admiral
Posts: 8,434
Registered: ‎07-14-2011

Re: Etec G2 300hp operating parameters and manual


@k2sanjuan wrote:

Can you tell me where to find bullitin about water to #6 cyl.

 

Dealers all claim they know nothing

 

I have a 2016 300 G2


That 2017-02W bulletin applied only to a small range of serial numbers manufactured about a year ago and most were corrected at the factory before shipping. The bulletin is for the very few that were already at a dealership or sold to customers.

 

What is your engine serial number?

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.