Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Posts: 9,057
Registered: ‎07-14-2011

Re: Evinrude 225 HP FICHT 1999 - No Ignition during cranking

Was the person a FICHT trained tech and experienced with them?  If so, also have them inspect the TPS actuator to see if is the newer metal rod or the older style wire loop design. Another item to check is if the injector to cylinderhead screws have  3/8" hex heads or 1/2" heads.





"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 



The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.

Posts: 5
Registered: ‎03-13-2018

Re: Evinrude 225 HP FICHT 1999 - No Ignition during cranking

Yes gold certified by Evinrude! I will check on the other items