Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Mate
Posts: 1
Registered: ‎02-28-2019

Fuel pump replacement for motor not available!?

Hello everyone,

I have a 1998 15hp Evinrude motor with a cracked fuel pump housing. Locating a replacement seems near impossible. Literally hours of searching the web have come up with nothing. If anyone out there can be of any assistance thank you very much in advance. Here are the motor details:

Year 1998
15hp
Model Number E15R4EEB
Fuel pump part number 435 352

Thanks for any help!
Admiral
Posts: 8,441
Registered: ‎07-14-2011

Re: Fuel pump replacement for motor not available!?

 

 

The letters EE in your model number signify that the motor is a 1999.

 

A company has advertised that they can repair the fuel pumps on the Evinrude built 9.9-15 HP 4-strokes. 

Petty's Marine 330-879-2153  - call between 10 & 6 EST in Ohio

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Skipper
Posts: 6
Registered: ‎06-23-2016

Re: Fuel pump replacement for motor not available!?

As long as your base is good, this is how i modified a fuel pump on a 9.9 Evinrude 4 stroke using a 2 stroke fuel pump.

 

Here is a link showing how I converted the fuel pump and a short video of it running after the conversion.

 

Hopefully, this will help.

 

https://drive.google.com/open?id=0B0qc6FDnDRkATS1JVG10OG1ET2s

 

https://drive.google.com/open?id=0B0qc6FDnDRkAZjdpMU54X2dkaUE