Evinrude E-NATION, for those dedicated to water, power, fishing and fun
Reply
Highlighted
Mate
Posts: 4
Registered: 4 weeks ago

G2 Code 180

I have 2018 G2 225s on a 26' Cape Horn - love the engines, but the port one issued a Code 180 yesterday at WOT.  Based on a prior thread, I checked the caps on the top of the engine and, sure enough, the second cap was missing.  Checked the starboard engine as well and the second cap was in place, where it was supposed to be.

 

Returning to the port engine, I felt around the space beneath the top level cap but could not locate the missing second cap.  So, my question is whether I can access the space into which that cap #2 has likely migrated by removing one of the side panels, if so which?  Or, am I headed to the dealer who installed the engines for what sounds like it should be a fairly simple fix?

 

The information provided on this message board is great and I really appreciate how it shortens the learning curve!

 

MDJGofish

Highlighted
Admiral
Posts: 9,387
Registered: ‎07-14-2011

Re: G2 Code 180

 

 

Often a pair of mechanical fingers can reach in and grab the plastic cover plug from the throttle body. If not, then you have to take part of the motor apart for access.

The engine installer is likely at fault for not securing the cover correctly and should take care of this for you.

 

G2 Motor Cover Plugs - instructions.JPG

 

 

 


"There is never just one thing wrong with a boat";
                    -- Travis McGee, main character in a book series by John D. McDonald 


 



***************

The factory recommends that a properly trained technician service your Johnson or Evinrude outboard motor. Should you elect to perform repairs yourself, use caution, common sense, and observe safety procedures in the vicinity of flammable liquids, around moving parts, near high-temperature components, and working with electrical or ignition systems.

The information offered here is only general in nature and should not be construed as complete factory approved procedures, techniques, or specifications. Always use the proper service manual for your motor, up-to-date service literature, the correct tools, and have an understanding of how to proceed with troubleshooting and repair methods. If you are unsure or uncomfortable with a procedure, a situation, or a technique, enlist the services of a factory trained technician.


Highlighted
Mate
Posts: 4
Registered: 4 weeks ago

Re: G2 Code 180

Thanks very much for this information - sorry to be dense, but where is the throttle body?  Do I need to remove a side cover plate to access that area?

 

Thanks,

 

MDJGofish

Highlighted
Captain
Posts: 930
Registered: ‎08-20-2017

Re: G2 Code 180

The throttle body is top/front. Directly behind the panel where the battery cables attach. May be able to see a bit with the color side panels removed.
Highlighted
Mate
Posts: 4
Registered: 4 weeks ago

Re: G2 Code 180

Many thanks; will give that a try.
Highlighted
Mate
Posts: 4
Registered: 4 weeks ago

Re: G2 Code 180 (and flimsy panel gaskets?)

Could not see cap #2 after removing side panels. So took to dealer who used $40 Depstech wifi endoscope to locate and fish out cap with mechanical fingers thusavoiding more involved disassembly.   Ordered my endoscope today - thanks for the help in resolving problem.

 

In trying to find cap before taking to dealer, i noted that the gaskets around the openings once the panels were removed were deformed in several places.  Has anyone had an issue with those gaskets?  They look kind of flimsy for the task they are intended to perform.   

 

MDJGofish

Highlighted
Captain
Posts: 38
Registered: ‎07-13-2018

Re: G2 Code 180 (and flimsy panel gaskets?)

Is there any indication of those caps are loose and inclined to come off?

And why does that cap coming off cause a fault?

 

Highlighted
Captain
Posts: 174
Registered: ‎10-21-2015

Re: G2 Code 180 (and flimsy panel gaskets?)

The cap coming off does not cause a problem.  Where the cap ends up may cause a problem. When the cap winds up in the throttle body, it often causes restricted movement of the throttle plate which is a problem 

ElderSparky



· Was your question answered? Help others find the answer by clicking "Accept as Solution".
· See a great post? Give a Kudo kudo.pngto show your appreciation!